What are the specs for the Audio Research D-110?

Power Output:

110 watts per channel minimum RMS (both channels operating) at 8 ohms from 1 Hz to 20 kHz with less than .25% (D-110B: .1%) total harmonic distortion. Typical .02% at 1 kHz. Typical 220 watts into 4 ohms, 130 watts into 8 ohms, 70 watts into 16 ohms at clipping.

Power Bandwidth:

-

Frequency Response:

.05 Hz to 100 kHz (-3 dB), 1 W, 8 ohms.

Input Sensitivity:

1.5 Volts RMS for rated power and load.

Input Impedance:

D-110: 30K ohms. D-110B: 60K ohms

Damping Factor:

D-110: More than 200 at rated output and load (20 Hz to 20 kHz). D-110B: More than 500 (1 Hz to 20 kHz)

Distortion:

Intermodulation distortion: Less than 0.05% at rated output (80Vp-p) and load, SMPTE method. THD and IMD both decrease with decreasing output (typically less than .02% at 1 watt per channel RMS)

Hum & Noise:

D-110: Wide band, unweighted, more than 100 dB below 100 watts at 8 ohms - power line components (hum) 90 dB below 100 watts at 8 ohms. D-110B: Less than 50 microvolts equivalent input noise with shorted inputs (20 Hz to 20 kHz). Typically 95 dB below rated output.

Power Requirements:

D-110: 105-120/210-240 VAC 50/60 Hz, 600 watts maximum D-110B: 105-120/210-240 VAC 50/60 Hz, 1500 watts maximum momentary, 550 watts @ rated power, 300 watts @ idle

Other:

Output offset: Less than 10 mV. Protection components: Thermal AC switch, AC line fuse, DC supply fuses, speaker line fuses.

Dimensions:

19" (48 cm) W (standard rack panel) x 10 ½" (26.5 cm) H x17 ¼" (43.6 cm) D (front panel back). Handles extend 1 ⅝" (4.1 cm) forward of the front panel.

Weight:

92 lbs. (42 kg) Net, 107 lbs. (49 kg) Shipping.